Your cart is currently empty.
The Stigma-Rotary® “Beast” is a unique, solid-hitting machine with zero give.
The “Beast” can be powered by two different MotorPlugs; the 4.5 Watt MotorPlug or the super powerful 10 Watt MotorPlug. There are four different stroke excenters available: Short: 2.6mm, Medium: 3.5mm (pre-installed, comes as standard with the MotorPlug) Long: 4.4mm, as well as the new adjustable stroke excenter from 2.5mm to 4.7mm. The bodies can be used with the 4.5 Watt or the 10 Watt powered MotorPlugs, as well as the different stroke excenters! With the Stigma-Rotary® EasyPlug system, the MotorPlug can be attached or removed in a matter of seconds.
The same MotorPlug can power all your “Beast” and “Prodigy” machine bodies, or you can use the same machine body and attach any combination of different powered (4.5 Watt or 10 Watt) MotorPlugs with different stroke length excenters. To help avoid cross contamination, the MotorPlug can be bagged prior to being plugged into the machine body, or just bag the machine with the MotorPlug already attached. The machine bodies can be autoclaved.
What is the difference between the 4.5 Watt MotorPlug and the 10 Watt MotorPlug?
The 4.5 Watt MotorPlug has more than enough power to run Stigma-Rotary® machines. It is one of the strongest motors you can find on rotaries; it will effortlessly push configurations of up to 50 needles. The 4.5 Watt MotorPlug has an RCA connection only, however a clipcord upgrade is available if you wish to have a clip cord connection on your 4.5 Watt MotorPlug. Advantages of the 4.5 Watt MotorPlug: it is lighter and smaller; it weighs only 45 grams. It is good for everything; shading, blending, layering, colour packing and lining.
So why buy the 10 Watt MotorPlug with twice the power?
The 10 Watt MotorPlug has a different feeling and performance; it has much more torque so it doesn’t stall out (bog down), so the speed of the machine stays constant. Even on lower volts, no matter how much resistance, the needles can still penetrate the skin. The 10 Watt MotorPlug can drive any needle or needle cartridge with ease, so you don’t need to remove the stay up spring from the machine or increase the volts to get it started. It can run for 24 hours and still stay cool! And because it is so powerful, it does the job even more effortlessly and will last for longer. The 10 Watt MotorPlug has both RCA and clipcord connections.
NOTE: ALL STIGMA MACHINE PROBLEMS
All Stigma machines have a 12 month manufacturer's warranty from date of invoice. So before contacting Protat Tattoo Supplies please complete the form at this website. Most problems can be sorted by email and will not need you to send your machine anywhere. A Stigma technician will contact you within 48 hours.