Cart (0)
Your cart is currently empty.
Power Supplies » Critical Power Supplies & Accessories
Critical Power Supplies & Accessories
Critical’s NEW G2 Series of power supplies have been completely re-engineered from the ground up to produce the cleanest, most crisp power available on the market. With the new 6 amp peak current capacity and true 4 amp continuous current capacity, the G2 power supplies can handle any coil or rotary tattoo machine on the market with solid power, no matter how long you tattoo.
Download the Critical Power Supplies Manual
https://www.youtube.com/watch?v=VadUbTmUNBU
Critical Atom Power Supply
Code: PS40
• Compatible with all coil and rotary machines.
• Built in magnets and grippy silicone for use on a variety of surfaces
• Simple push/Rotary control to turn on/off output and to change voltage (No pedal required to run)
• Colour indicates voltage (range 1.5 – 17)
• Maintained or momentary foot pedal modes
• Jump start enabled for hard starting rotaries
• Fully machined, Anodized Aluminum housing
• Dimensions: 1 3/4” height, 2 7/8” diameter, 6.4 oz weight
• Comprehensive 2 year manufacturers warranty
• Includes: Atom power supply and power adapt0r
Download the Critical Power Supplies Manual
$208.00
+ Add to cart
CX1-G2 power supply
Code: PS31
NOTE: ALL CRITICAL PRODUCT WARRANTIES
All Critical products have a 24 month manufacturer's warranty from date of invoice. Before contacting Protat Tattoo Supplies with any issues, please complete the form at the Critical website http://criticaltattoo.com/contact-us/ A Critical technician will contact you within 48 hours. Alternatively call 0011 1 877 271 1446 (international call).
• NEW! 6 amp peak current, 4 amp true continuous current
• NEW! Pedal override button (no need for a foot pedal if you run continuous mode)
• Precision regulated set point voltage 0-18vdc
• Built in short circuit protection
• .1 volt adjustment resolution
• Voltage presets 2
• NEW! Momentary or Maintained foot switch modes. (Easy one button toggle)
• Non volatile memory (holds presets even when power is removed)
• Universal input 110-240vac 50/60hz
• Accepts standard 1/4″ clip cord and foot pedal connections
• Easily bagged with typical machine or bottle baggies
• Power supply includes one magnetic universal mount
• 2 year full mfg warranty
Download the Critical Power Supplies Manual
$200.00
+ Add to cart
CX2R-G2 Power supply
Code: PS32
NOTE: ALL CRITICAL PRODUCT WARRANTIES
All Critical products have a 24 month manufacturer's warranty from date of invoice. Before contacting Protat Tattoo Supplies with any issues, please complete the form at the Critical website http://criticaltattoo.com/contact-us/ A Critical technician will contact you within 48 hours. Alternatively call 0011 1 877 271 1446 (international call).
• NEW! 6 amp peak current, 4 amp true continuous current
• NEW! Session machine run time meter
• NEW! Total machine run time (odometer)
• NEW! Session time
• NEW! Session currency meter (based on hourly rate set by user)
• NEW! Pedal override button (no need for a foot pedal if you run continuous mode)
• Wireless foot switch ready NEW! (you can now select the channel you want)
• Precision regulated set point voltage 0-18vdc
• Built in short circuit protection
• .1 volt adjustment resolution
• Time of day
• Voltage presets with 2, 4, or 6 machine memory modes
• Momentary or Maintained foot switch modes. (Easy one button toggle)
• Non-volatile memory (holds time and presets even when power is removed)
• Universal input 110-240vac 50/60hz
• Accepts standard 1/4″ clip cord and foot pedal connections
• Volts, Amps, Speed (hz), Duty Cycle (%), and STL
• Easily bagged with typical machine or bottle baggies
• Power supply includes one magnetic universal mount
• 2 year full manufacturer warranty
Download the Critical Power Supplies Manual
$380.00
+ Add to cart
CX2R-G2 / Pedal Combo power supply
Code: PS33
NOTE: ALL CRITICAL PRODUCT WARRANTIES
All Critical products have a 24 month manufacturer's warranty from date of invoice. Before contacting Protat Tattoo Supplies with any issues, please complete the form at the Critical website http://criticaltattoo.com/contact-us/ A Critical technician will contact you within 48 hours. Alternatively call 0011 1 877 271 1446 (international call).
This is the cleanest setup of all of the choices. CX2R-G2 with internal receiver and XP-W wireless pedal. No receivers to lose track of, just a
power supply and pedal. This combo package comes complete with a power adaptor and magnetic mount for the power supply.
New CX2-R-G2 Critical Power Supply
• NEW! 6 amp peak current, 4 amp true continuous current
• NEW! Session machine run time meter
• NEW! Total machine run time (odometer)
• NEW! Session time
• NEW! Session currency meter (based on hourly rate set by user)
• NEW! Pedal override button (no need for a foot pedal if you run continuous mode)
• Wireless foot switch ready NEW! (you can now select the channel you want)
• Precision regulated set point voltage 0-18vdc
• Built in short circuit protection
• .1 volt adjustment resolution
• Time of day
• Voltage presets with 2, 4, or 6 machine memory modes
• Momentary or Maintained foot switch modes. (Easy one button toggle)
• Non-volatile memory (holds time and presets even when power is removed)
• Universal input 110-240vac 50/60hz
• Accepts standard 1/4″ clip cord and foot pedal connections
• Volts, Amps, Speed (hz), Duty Cycle (%), and STL
• Easily bagged with typical machine or bottle baggies
• Power supply includes one magnetic universal mount
• 2 year full manufacturer warranty
PLUS
Critical XP-W Wireless Foot Pedal
The XP-W Wireless Foot Pedal 64 wireless channels with random addressing means that hundreds of pedals can be used in the same place. It uses a standard coin cell battery (CR-2450) with a minimum battery life of three years of daily use. It can also be used in wired mode with a standard clip cord. 360 degree actuation. Fully machined from billet aluminum and powder coated. Regardless of the pedal option that you choose below, the pedal itself is the same and will work with all current and future Critical Tattoo wireless devices. All Critical foot pedals have a 2 year full manufacturer warranty.
Download the Critical Power Supplies Manual
$480.00
+ Add to cart
CX2-G2 Critical Power Supply
Code: PS37
NOTE: ALL CRITICAL PRODUCT WARRANTIES
All Critical products have a 24 month manufacturer's warranty from date of invoice. Before contacting Protat Tattoo Supplies with any issues, please complete the form at the Critical website http://criticaltattoo.com/contact-us/ A Critical technician will contact you within 48 hours. Alternatively call 0011 1 877 271 1446 (international call).
The CX2-G2 model is almost identical to the more expensive CX2-R-G2 , except it does not have the wireless foot switch ready feature.
- NEW! 6 amp peak current, 4 amp true continuous current
- NEW! Session machine run time meter
- NEW! Total machine run time (odometer)
- NEW! Session time
- NEW! Session currency meter (based on hourly rate set by user)
- NEW! Pedal override button (no need for a foot pedal if you run continuous mode)
- Precision regulated set point voltage 0-18vdc
- Built in short circuit protection
- .1 volt adjustment resolution
- Time of day
- Voltage presets with 2, 4, or 6 machine memory modes
- Momentary or Maintained foot switch modes (Easy one button toggle)
- Non-volatile memory (holds time and presets even when power is removed)
- Universal input 110-240vac 50/60hz
- Accepts standard 1/4″ clip cord and foot pedal connections
- Volts, Amps, Speed (hz), Duty Cycle (%), and STL
- Easily bagged with typical machine or bottle baggies
- Power supply includes one magnetic universal mount
- Additional mounting options available in store
- 2 year full manufacturer warranty
$330.00
+ Add to cart
Critical G2 Wireless Foot Pedal (CXP)
Code: FS38
- NEW! Lower Price
- NEW! Improved shielding to limit debris getting inside the pedal
- NEW! Better response with one central switch vs multiple contact springs
- NEW! Uses 2 AAA batteries (included) that last 3 years of daily tattooing
- NEW! Spun, anodized aluminum top
- Non-skid rubber bottom
- Easily bagged
- Can also be used wired with any standard clip cord
- Run as many as you want in one place without interference
- Only compatible with all past and future Critical power supply models
- Dimensions: 5 inch Diameter, 1 inch height, 8.6 ounce weight
- Foot pedal does not come with Critical receiver (needed)
- Comprehensive 2 year manufacturer warranty
$99.00
+ Add to cart
Critical wireless foot pedal and universal receiver combo
Code: FS26
The Critical wireless foot pedal and universal receiver combo will work with all power supplies that use a 1/4″ foot pedal jack. This system adds the option of maintained pedal mode when using it with a simple power supply. (The Universal receiver is not needed if you are using the pedal with our CX2R power supply).
Download Critical Tattoo Manual (PDF)
$240.00
+ Add to cart
Universal Receiver and Adaptor
Code: CURA
This Critical Universal receiver will plug into any power supply with a standard 1/4” foot pedal jack
• Works with any of our current, past and future wireless pedals
• Adds maintained pedal mode feature
• Powered via external power adaptor
• Comprehensive 2 year manufacturer warranty
• Made in the USA
How To Use:
Press and hold the sync button on the receiver until the LED begins to blink. The next step would be to press down on the Wireless Foot Pedal and the light indicator on the foot pedal and receiver will go solid and then go way to confirm that its synced
successfully.
The receiver also offers the exclusive feature of "Maintain Mode" by clicking the receiver once and when you step on the foot pedal it should maintain the power without having your foot on the pedal. To exit "Maintain Mode", simply click the receiver button
again to switch back to "Manual Mode"
Comes with an Australian plug adaptor
$120.00
+ Add to cart
G2 Ram Mount Assembly
Code: CRMA
The Critical G2 Ram Mount consists of a 1” diameter rubber ball, connected to a custom Critical G2 Power Supply adaptor.
The adapter attaches directly to the backside of any Critical G2 Power Supply, replacing our factory mount.
Included: 1 RAM mount and 10/32 screw
Made in the USA
$50.00
+ Add to cart
Power Supply Power Adaptor
Code: CPA
Grounded 90-240v A/C worldwide input 0-18vdc 45watt output.