Cart (0)
Your cart is currently empty.
Power Supplies
Power Supplies
Sunskin Power Supply & Meter
Code: PS11
This new power supply has been developed to simplify the verification of the proper setting, by the speed of the machine shown on the led display.
A mode-selection switch changes the led display units from volts (output voltage) to hertz mode (machine speed).
In Sunskin style, the light and compact frame was produced from a single block of metal (aluminium), that houses a powerful 4 amp, electronic power supply and a ten-turn voltage control to improve the accuracy setting.
This unit utilizes switching technology that automatically adjusts input voltage (from 110 to 240 volts) to work in any country in the world.
$490.00
+ Add to cart
Talons Original Mini Power Supply - Black
Code: PS9
"MADE IN THE USA"
A quality pack that will last for years. "Rohs" COMPLIANT.
This is a Gloss Black Powder Coated Steel cased power supply, 0-14 volt@ 2 amps, -10 turn, Auto sensing Voltage for worldwide use.
Uses 1/4" phono jacks. Size is 1.25" High, 2.5" wide, 3.5" long.
$210.00
+ Add to cart
Talons Mini Digital Power Supply - Black
Code: PS10
"MADE IN THE USA"
Another quality pack that will last for years. "Rohs" COMPLIANT.
This is a Gloss Black Powder Coated Steel cased power supply, 0-14 volt@ 2 amps, -10 turn. Auto sensing Voltage for worldwide use.
Uses 1/4" phono jacks. Size is 2.5" H x 3" W x 3.75"D.
$295.00
+ Add to cart
Talons Mini Digital Power Supply - Pink
Code: PS18
"MADE IN THE USA"
A quality pack that will last for years. "Rohs" COMPLIANT.
This is a Gloss Pink Powder Coated Steel cased power supply, 0-14 volt@ 2 amps, -10 turn. Auto sensing Voltage for worldwide use.
Uses 1/4" jack plugs. Size is 2.5" H x 3" W x 3.75"D.
$295.00
+ Add to cart
Talons Mini Digital Power Supply - Red
Code: PS19
"MADE IN THE USA"
A quality pack that will last for years. "Rohs" COMPLIANT.
This is a Gloss Red Powder Coated Steel cased power supply, 0-14 volt@ 2 amps, -10 turn. Auto sensing Voltage for worldwide use.
Uses 1/4" jack plugs. Size is 2.5" H x 3" W x 3.75"D.
$295.00
+ Add to cart
EMS420 Eikon Power Supply
Code: PS36
TATTOO ARTISTS TALKED, AND WE LISTENED.
We took our most innovative power supply on the market today, gathered feedback from artists like you, along with advances in technology and design - and kicked it all up a notch. Prepare to be impressed with the EMS420.
Accuracy and responsiveness are critical during the tattoo process. You need to be able to tap into your desired voltage, with precise response and control. Inaccuracy simply can’t happen. So – we have completely re-written the operating system, incorporated smart chip technology and made some changes both inside and out.
Featuring:
- High touch sensitivity voltage adjustment buttons for quick and accurate fine touch adjustments and rapid 0.2 volts/3 x per second coarse voltage adjustments.
- Sleep Mode - 30 minutes
- Brightly lit green LCD display and LED buttons
- Metallic gold fleck green enclosure
- Durable precision laser cut stainless steel stand
- Designed and manufactured using 95% North American quality components
$460.00
+ Add to cart
Eikon Bluetooth Foot Switch
Code: FS42
The Eikon Bluetooth (Foot)Switch™ frees you from the wires of a traditional footswitch. Easily paired with your ES500 power supply, this small silicone button has a magnetic base that sticks firmly to your station. You can also slip it under your foot, or tuck it in your stretching hand.
The Eikon Bluetooth (Foot)Switch™ frees you from the wires of a traditional footswitch. Easily paired with your ES500 power supply, this small silicone button has a magnetic base that sticks firmly to your station. You can also slip it under your foot, or tuck it in your stretching hand.
- Suits ES500 Power Supply only (not included)
- Durable shock-proof and waterproof silicone
- 1.5” x 1.5” x 0.4” inches in size (3.8cm x 3.8cm x 1cm)
- Replaceable CR2032 Battery with 2-year lifetime
Important Note: Updating the firmware on the Bluetooth (Foot)Switch will prevent the device from pairing with your ES500 Power Supply.
$72.00
+ Add to cart
ES500 Eikon Power Supply
Code: PS57
The ES500 is designed to adapt to your style, your work space and the daily challenges tattooing throws at you.
This compact, durable power supply is loaded with the features you’ve been asking for, many of which are firsts for Eikon.
- 360 Adjustable Display: Rotate the ES500 LED display and route your cables in any direction, for the best experience wherever and however you work.
- Dual Machine Ports: Eliminate downtime when switching between machines with different cord styles, and reduce the risk of cross-contamination.
- Eikon Bluetooth (Foot)Switch™: Easily and wirelessly integrate this handy (foot)switch into your tattoo process. Replaces a traditional footswitch while freeing up a port for a second machine. (included)
- 2 USB Charging Ports: Allow you to charge your essential devices and save space on your workstation. Power a reference tablet or small LED lights, and charge your phone or wireless headphones.
- Magnetic Base and Sticky Foot: Grips firmly to any surface and locks tight to metal workstations so you can set it, and forget it.
- 6 Voltage Presets per Channel: Lets you quickly access and adjust the voltages you use most. Presets ensure consistent performance and ease of use.
- Jumpstart Mode: Gives an extra 0.5V jumpstart any time you engage your footswitch to kickstart machines pushing larger mags, without having to adjust your voltage.
- Tactile Membrane Interface. Cover it. Bag it. Wipe it Down. The ES500 interface membrane is responsive even when covered with a protective barrier, and durable enough to withstand harsh cleaners.
- Powder-Coated Aluminum Enclosure: Resists drops, hard knocks, bangs, and spills. The ES500 is built to last, and can endure the thorough cleaning process required by tattooing.
- 2-Year Standard Eikon Warranty (same quality, same service, double the warranty)
A powder-coated steel mounting plate and matching hardware are included with every ES500. Use the mounting plate on your favorite GoPro® mount, stand, or attach it to your workstation.
Built to Eikon’s high standard of clean, consistent power, the ES500 is designed to work with traditional coil machines and rotary machines. Our power supply ensures your machine will always run at peak performance.
Designed and manufactured in Canada by Eikon. Patent Pending.